Loading bay green resin floor

Pagefresh HF is a 6-9mm heavy duty, chemical re­sistant polyurethane resin floor screed. Ideal for wet processing areas such as chemical processing plants, secondary chemical contami­nent zones, food manufacturing areas and food preparation areas.

Benefits:

  • Very high chemical resistance
  • Hygienic – Easy to clean, maintain and sterilise; minimal joints
  • Heat resistant to 120*C @ 9mm
  • Steam cleanable
  • Non-tainting and non-dusting
  • High abrasion resistance
  • Withstands high mechanical stress
  • Low odour during application
  • Positive slip resistance
FeRFA Resin Flooring guidelines

Description:

Applied in two or more coats. Generally solvent or water borne.

Duty:

light foot traffic, occasional rubber tyred vehicles.

Typical Thickness:

up to 150 µm

Description:

Applied in two or more coats. Generally solvent free.

Duty:

light foot traffic, occasional rubber tyred vehicles/regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys

Typical Thickness:

150 µm to 300 µm

Description:

Applied in two or more coats. Generally solvent or water borne.

Duty:

lregular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys

Typical Thickness:

300 µm to 1000 µm

Description:

Aggregate dressed systems based on multiple layers of floor coatings or flow-applied floorings, often described as ‘sandwich’ systems.
MD/HD

Duty:

regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact

Typical Thickness:

> 2 mm

Description:

Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface.

Duty:

regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact

Typical Thickness:

2 mm to 3 mm

Description:

Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimize porosity.

Duty:

regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys/constant fork lift truck traffic, hard plastic wheeled trolleys, some impact

Typical Thickness:

> 4 mm

Description:

Having a smooth surface.

Duty:

constant fork lift truck traffic, hard plastic wheeled trolleys, some impact/severe heavily loaded traffic and impact

Typical Thickness:

4 mm to 6 mm

Description:

Trowel-finished, aggregate filled systems effectively impervious throughout their thickness.

Duty:

severe heavily loaded traffic and impact

Typical Thickness:

> 6 mm

Product: Pagefresh HF Finish: Matt

Thickness: _ mm (6-9 mm)

Preparatory  work and application in accordance with contractors instructions.

Supplier/ Installer: Page Industrial Coatings Ltd Telephone: Customer Service +44 (0) 1443 475270

Substrate Requirements: Concrete or screed substrate should be a minimum of 25 N/mm2, free from laitance, dust and other con­tamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground wa­ter  pressure.

A special Pagefast Primer can be used for substrates up to 100% RH (surface dry)

For areas where continual heat resistance (above  50 degrees) is critical use Pagefresh primer. Pagefresh primer is also suitable for substrates up to 97% RH, please consult the Product datasheet for further details.

The priming process may be omitted when applying Page HF over lsopol SBR screed, or when consistency of the concrete base ensures minimal porosity,  is free of voids and is surface dry up to 97% RH.

Primer: (if Required) Page Prime @ 0.25kg/m2 (porous substrate may require 2 coats)

OR: where a dpm is required,

Page Hydraseal DPM @ 0.5 kg/m2 OR: where high heat resistance is critical

Pagefresh primer @ 0.25 kg/m2 Scatter: 1-2mm silica sand @ 0.5 kg/m2

Topping: Page HF (density 2.1 kg/I)

For general chem. Resistance-12.6 kg/m2@ 6mm For best temp resistance-18.9 kg/m2@ 9mm

Detailed application instructions are available upon re­ quest.

Installation Service

This installation is carried out by Page Industrial Coat­ ings approved applicator all Resin and accredited mem­ber of FERFA.

The finished systems is assessed as non hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, mainte­ nance and cleaning. Environmental and health consid­ erations are controlled during manufacture and applica­tion of the products by Page Industrial Coatings  and staff are fully trained and experienced employees.

The figures that follow are typical properties achieved in laboratory tests at 20 degrees and at 50% Relative Hu­midity.

EN 13813 A1.0-B2.8-I R20.0 Synthetic screed material for use internally in buildings
Reaction to fireBs S1(13501-l)
Impact ResistanceIR 20.0(EN ISO 6272)
Wear ResistonceA 1.0(EN 13892-3)
Boned StrengthB2.8((EN 13892-8))

 

Slip Resistadlce
Method described in in BS 7976-2 (typical values for 4-S rubber slider)
Dry >40 low slip potential (in accordacnce with I-ISE and UKSRG guidelines)

The slipperiness of flooring materials can change significanlly, due to the installation process, after short periods of use, due to inappropriate maintenance, longer term wear and/ or surface contaminants (wet or dry).

Textured systems are recommended to meet slip resistance value requirements for wet conditions and/ ,or surface contaminants (wet or dry) – please contact our technical Advisors for further details and specifications.

Temperature resistanceTollerant to intermittent spillages up to 120°C or sustained dry heat from -A40°C to 105°C (at 9 mm thickness.)
Water PermeabilityNil – Karsten test (impermeable)
Vapour PermeabilityASTM E96 :9 0 3g/m’/ 2.4hrs(at 9 mm thick)(impermeable)
Chemical ResistanceContact technical department – excellent resistance to sugars and most acids (organic and inorganic)
Compressive strength> 50 N/mm2 (BS 6319)
Flexural Strength20 N/mm2 (BS 6319)
Tensile Strength10 N/mm2 (BS 6319)

Speed Of Cure

10°C20°C30°C
Light Traffic36 hours24 hours12 hours
Full Traffic72 hours48 hours24 hours
Full Chemical Cure10 days7 days5 days

Aftercare – Cleaning and Maintenance
Clean regularly using a single or double headed rotary scrubber drier in conjunction with a m ild alkaline detergent.